ARCAM FMJ P49
Arcam’s P49 power amplifier represents the pinnacle of Arcam’s audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver a power amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.
ARCAM HDA SA10
The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.
ARCAM HDA SA20
SA20
There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed.
Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over.
Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform.
ARCAM rHead
Arcam has always been known for producing class-leading integrated amplifiers, all of which featured excellent headphone stages. The rHead continues that tradition, but n the highly specialised area of discrete analogue headphone amplification in a small, solidly and beautifully built unit designed to complement the audio system of any headphone lover.
ARCAM rPhono
The Arcam rSeries products are all about getting the best sound from any audio device. These products can be used with any audio system and are a brilliant way to enhance your audio system.
ATC CA2
CA2 – Stereo Pre-Amplifier
- Hand built in the UK.
- Ultra-low noise discrete design.
- 5 line inputs via RCA/phono.
- XLR and RCA/phono main outputs.
- Additional Sub, Tape and Headphone outputs.
- 1 x RIAA phono input via RCA (MM/MC configurable)
- 6-year warranty
“…if you want to hear the important musical detail presented in a coherent, clear-cut fashion this pairing has remarkably little competition in the two box arena. There are a few integrated amps which give them a run for their money in one respect or another but nothing comes to mind which seems like a better overall package.” Jason Kennedy Hi Fi+ No75.
ATC CDA2
CDA2 – CD Pre-Amplifier
Overview
- All-discrete class-A pre-amplifier with balanced and unbalanced outputs.
- Two analogue inputs via RCA/phonon and one via 3.5mm mini-jack.
- High-performance CD Player.
- Premium AKM 32-bit DAC.
- USB digital input supporting up to 384kHz PCM data and native DSD256.*
- Headphone amp featuring discrete output stage.
- Handmade in England.
- 6-year warranty.**
*DSD256 support via PC only (up to DSD128 via Mac).
** TWO years on CD mechanism.
Looking for an all in one solution?- SIACD
ATC SCA2
SCA2 – Discrete Stereo Pre-Amplifier
- Hand built in the UK.
- 2 balanced stereo inputs and balanced output.
- 6 phono inputs.
- Fully discrete Ultra-Low noise circuitry throughout.
- Optional Ultra-Low Noise discrete RIAA phono stage.
- 6-year warranty.
SCA2 REMOTE ONLY – €1,075
ATC SIA2-150
SIA2-150 – Stereo Integrated Amplifier
- 150 watts per channel.
- Class A/B operation.
- Hand built in the UK.
- 5 RCA inputs.
- Record, sub and pre outputs.
- Headphone jack.
- Remote control.
- 6 year warranty.
Ayon AURIS II “Reference” preamp
Since its market launch in 2014 the Auris has gained an excellent reputation worldwide and it is one of the rare tube preamps capable of transferring its fabulous tonal characteristics to the best advantage to the rest of the installation or respectively co-impress it. All this caused us to further consequently fine-tune it in the background to make this preamp even more exceptional and put it to the utmost in every detail. We have reworked the output stage, the power supply, the phono stage (new phono re-design) and the quality of the components has been readjusted on the decisive points,
The low Output Impedance purist parallel Single-ended 6H30 circuit topology is using zero dB negative feedback. The Line Gain is customer Switchable, 0dB or +6dB. Therefore, the Auris II preamplifier is also very flexible in combination with any type of power amplifier. Of course, we have retained and even intensified the modular and upgradeable concept. Options unbalanced or fully balanced, Signature version and Phono MM/MC-H, MC option for all varieties. All existing Auris I version preamps can be retrofitted to the newest version II.
This “Reference” preamp represents the highest standard of preamp based on 6H30 design achievement. Excellence in engineering, a special tube rectified power supply and superior premium components provides a special magic to the reproduction of music. The performance of the new Auris II is outstanding, very musical and neutral, transparent and vivid in its presentation. There is a huge space of the recording environment reproduced with uncanny realism. It offers a holographic soundstage previously unavailable at this price class.
OPTIONS
Reference Preamp-Unbalanced, Modular & Upgradable Design, 4x6H30 PSE output stage, 4 x Line In/RCA, 1 x HT/In, 2 X RCA/O, 1 x Tape Out, 4 x 6Z4, Tube Power Supply & Choke Regulated, RC 6500 Euro
- Signature Balanced, Top Grade Components + 1800 Euro
- Signature Unbalanced, Top Grade Components + 900 Euro
- Phono Module MM / MC + 1150 Euro
Ayon Conquistador – Linestage
“State of the Art & Cost – no – Object”
Timeless beauty – elegant, pure and full of innovative technology
This preamp is inimitable with a unique character. With the Conquistador everything started with a blank sheet of paper. Developing and designing a new project you must think unlimited and scrutinize everything. This way the Conquistador was created and it is a highlight in design and engineering art.
Four AA45 Mesh-triodes of our own proprietary production coupled with the unique quadruple VTC volume control, a special circuit design with four separate tube grid bias drivers, and the shortest thinkable signal path underline this absolutely exceptional concept in the world of preamps.
It’s extremely light-footed and joyful reproduction paired with a big soundstage and full of aura incarnate a very special way of sound deployment. This preamplifier shapes and impresses its magical character on the whole chain of reproduction to an extent that never existed before, a magic putting all listeners under its spell. Exactly those are the subtle differences between the so-called super pre-amps and the Conquistador, a pre-amp turning over a new leaf in the story of preamplifiers. We are convinced that the Conquistador will contribute to the way how the Ayon brand will be perceived in the future.
Limited production, 10 units per year only!
Ayon Polaris III
The new Polaris III is one of the finest tube preamplifier made, regardless of price.
It is a marvel of engineering with its unique C3m tube circuit design, a new revolutionary volume control system and construction. This tube preamplifier presents a new level of musical performance, 3D airy sound and construction quality among mid-priced vacuum tube preamps. It combines exceptional design and outstanding engineering, highest quality parts, best selected material and a never ending love for music. The external Polaris III AC~ Regenerator offers stable, regulated and purified AC power regardless of the incoming AC line quality.
This power supply provides a lowered noise floor, more liquidity, better spatial three-dimensional imaging, greater focus, richer colours, and decreased glare & haze.
- Polaris III Linestage WITHOUT Phonostage MM/MC 20000 Euro
- Fully Balanced Version for Linestage only, 1x Fully Balanced input Option +3000 Euro
Ayon S-3
The S-3 is a ground-breaking design and this ultimate combination of modern new design and time proven concepts, will deliver music and superb sound performance that you would expect from an Ayon product with maximum home audio flexibility. The S-3 includes a network player, analog preamplifier and a world class D/A-converter that gives the highest obtainable performance.
Ayon S-5
We are proud to introduce a sonically breath-taking model that may be the most musical and musically accurate Network-Player, the tube based S-5. The S-5 offers new dimensions of transparency and holographic. It immediately shows a large soundstage, greater transient speed top-to-bottom, purer resolution of low-level detail and expanded dynamic contrasts, with more bass slam, definition and extension. Compromise was not built into the S-5 design.
AYON SCORPIO
“The entrance into real high-end tube amplification”.
The Scorpio represents a dramatic rethinking of economic vacuum tube based integrated amplifier industrial design while retaining the basic architecture as our highly regarded “Spirit” amplifier.
The Scorpio integrated amplifier combines neutrality, realistic dynamics and power projection, true musicality with high resolution.
Perfect finish, elegant discrete design and outstanding sonic performance make the “Scorpio” unique, setting a new price-to-value standard in its class.
Ayon Triton III
We are proud to introduce our latest third-generation integrated amplifier, the Triton III. This design presents a substantial upgrade to our very popular Triton II stereo integrated amplifiers, highly-regarded for providing world class performance in a beautiful-engineered, compact, and elegant package. All the gain stages have been re-designed and optimized as well to provide for the shortest signal path and the most direct signal flow. The result is a significant advance in sonic performance, wider and deeper airy soundstage with greatly improved powerful bass punch and dynamics. Musical finesse and superb powerful performance has been combined without compromise into one convenient chassis and affordable pricing. Compared with many top grade integrated amplifiers, the Triton III is a mid-priced unit, but we are confident that value and musical performance is approached maybe by few KT150 designs only, regardless of cost.
The Triton integrated is also available as a pure stereo power amp, the Triton PA!
Chord CPA 3000 Pre Amplifier
The CPA 3000 shares many of the features found in the entry-level CPA 2500, but also draws on technologies found in our flagship Reference range preamps. Compared to its CPA 2500 sibling, the CPA 3000 introduces four balanced inputs with three unbalanced RCA inputs and, on the output side, there are one pair of balanced XLR outputs and a single pair of unbalanced RCA outputs.
Chord DAVE
Reference Digital to Analogue Converter, Headphone Amplifier and Preamplifier
DAVE is our flagship DAC, a true reference-level product, loaded with our latest-generation FPGA technology. Put simply, it is the most advanced DAC in the world.
Chord HUGO 2 (EISA Award Winner)
Transportable DAC/Headphone Amplifier
Hugo 2 is a powerful DAC and headphone amp that builds on the ground-breaking original. Designed for both home and mobile use, Hugo 2 transforms headphones and audio systems’ sound quality with its cutting-edge proprietary DAC technology.
Chord HUGO TT 2 DAC, Preamplifier & Headphone Amplifier
Developed from the multi-award-winning transportable Hugo 2, the Hugo TT 2 is bigger, better and more advanced in every way. TT 2 sets a new benchmark for table top DACs, eclipsed only by our flagship DAVE.
Chord MOJO
Your Music. Just Better
Welcome Mojo, the world’s most advanced portable digital to analogue converter DAC/Headphone amplifier. Thanks to technology derived from our Hugo series units and Dave reference converter, our little powerhouse, that’s just the size of a pack of playing cards, will not only make your music sound better, but will effortlessly drive any pair of headphones – wherever you are, no matter what.
HEGEL C54 4x150w
A multi channel amplifier designed for sound performance… not priced like diamonds. And still tailored to your needs. Sound too good to
HEGEL C55 5X150W
A multi channel amplifier designed for sound performance… not priced like diamonds. And still tailored to your needs. Sound too good to
HEGEL H120
Standing on the shoulders of GIANTS, the H120 carries forward the proud history of HEGEL amplifiers. The multi award winning designs that over the years have dazzled listeners with their combination of raw dynamics and delicate naturality. The H120 carries that legacy with it, but in a smaller and more affordable package.
HEGEL H190 with Dac, Airplay, DLNA
Hegel presents the H190, an amp with DLNA streaming capabilities that can play music from any streaming platform including AirPlay. With configurable inputs, a high end DAC, and a front facing headphone output you can enjoy ease of use with ultimate sound quality. In anodised black aluminium with an oled display, the H190 is beautiful enough to be the centerpiece in any system and powerful enough to drive almost any loudspeaker on the market.
Hegel H20
The Hegel H20 incorporates the latest version of the Hegel FET-technology. A practical benefit of the H20 FET-technology is a more rhythmic sound. It is simply better at re-creating a bass line. Another vital element is the removal of harmonic echoes in the higher frequencies, which result in a lot more detail and still a smoother and more natural sound.
Hegel H30
The massive H30 mono power amplifiers from Hegel play any loudspeaker in the world with ease and authority. The H30 is our best power amplifier ever, and is definitely a combatant for being the best power amplifier in the world. The H30 is developed as a mono block, but there is also the possibility to use it as a stereo power amplifier to start with if you are on a budget. Progress is a one way street and so for our power amplifiers. The H30 is using a new and improved version of the patented Hegel SoundEngine amplifier technology. This further reduce all types of distortion. In addition to the improve SoundEngine we are also using the highest possible level of the Hegel FET-technology in the input stage and the voltage gain stage.
HEGEL H390
The H390 is a REBEL by offering much of the performance of our Reference products, albeit at a lower price. A REBEL that in one integrated product offers the same as others do in two or three. A REBEL that provides world-class sound, jaw-dropping power and comes packed with convenient services.
HEGEL H90
The H90 provides the most dynamic 60 watts per channel sound you have ever heard and comes with a set of features that add value and flexibility. In the Hegel H90, we included network streaming, Apple Airplay, and a variety of digital and analogue connections. All (except streaming) of which are configurable to be fixed level inputs, allowing you to easily integrate the H90 in a Home Theater system. Or perhaps you just want to connect the digital output of your Sonos streamer and use the Sonos volume attenuator rather than the Hegel remote? There is also a high-quality headphone output and a sleek, informative, white OLED display.
Hegel HD30 (EISA Award Winner)
The Hegel HD30 is the ultimate digital control centre. It does everything you can dream of, and does so with world-class quality. There is an abundance of inputs, ranging from balanced AES/EBU and BNC connectors, to Network and USB connections – with the latter also accepting DSD signals. The built-in volume attenuator allows you to connect directly to a power amplifier or a pair of active loudspeakers. Highly advanced power supplies and careful lay-out brings the noise floor down towards a mindblowing – 150dB. In
Hegel P20
Hegel P20 Pre Amplifier – Balanced Pre Amplifier
The P20 is Hegel’s entry-level preamplifier and offers an affordable door into the Hegel Reference line of products.
Designing the P20 was not a task Hegel took lightly. Many of the ideas and concepts were taken from its bigger brother. Although scaled down, many of the good characteristics remain: the enormous soundstage, the deep rhythmic bass response, the perfect timing… In short, the sense of being there with the performers.
The P20 comes with a high-quality system remote control, milled out of one solid piece of aluminium. It has the same bead blasted and anodized surface finish as the preamplifier itself. You can really feel the quality of each part of the P20; not only hear it. There is a total of 5 regular inputs. Both balanced and unbalanced. In addition, a special Home Theatre input allows integration in Home Theatre systems. Finally, there are both balanced and unbalanced outputs as well as a fixed line-level output.
The idea behind the P20 was, as mentioned, to offer a more affordable entry into our line of separates. But most of all, it was to set a new standard of price and performance in preamplifiers. Something we think Hegel have achieved. The preamplifier is perhaps the most delicate unit in a sound system. Because the signal levels are so low, even the tiniest levels of noise or distortion smear the image and mask the small details that enliven the music.
In designing the P20, Hegel achieved the highest quality of sound at such a low price point by using brand new technologies, such as Silicon Germanium transistors. In addition, Hegel implemented high-frequency components that were not originally designed for audio, and use them in ways that had never been done before. The result is an open and natural sounding preamplifier at a very competitive price.
Hegel P30 Pre-Amplifier
Hegel P30 Pre Amplifier – Balanced Pre Amplifier w/SoundEngine
The P30 is the best preamplifier ever developed by Hegel. With its patented technology and hand matched components, the P30 is a confident contender in the race towards being the best preamplifier in the world. Regardless of price.
Despite what many hi-fi enthusiasts believe, preamplifiers are actually one of the most difficult audio components to develop. At the same time, it is one of the most important components in a well-sounding system. The reason is that the signal strength is very low when entering the preamplifier, and is therefore very susceptible to high-frequency noise and distortion elements. The most critical phase in the preamplifier is the volume regulation, and in the P30 this is a masterpiece in itself. The physical volume control knob is only used to describe the desired volume output level to the array of Gigahertz MOS-transistors. These direct the music signal through a network of high-quality resistors that reduce the signal level.
After the volume control circuit, the signal is directed through the amplification circuit. For the first time ever Hegel is using the patented SoundEngine technology in the preamplifier. Combined with Hegel’s use of hand-matched FET transistors, this results in unsurpassed levels of musical distortion and noise. In total, the music signal will only pass through 2 transistors and between 1 to 3 resistors on its way through the P30. The sound you hear from the P30 can only be described as organic and very natural. To quote a journalist; “The Hegel sounds so much more natural than my previous reference. And it does so without flashing itself with gold and diamonds”.
The Hegel P30 has 2 pairs of balanced inputs (XLR) and 3 regular unbalanced (RCA). In addition to this, it has a Home Theatre input that allows you to integrate it into a Home Theatre system. The P30 also has a 3,5 mm IR-direct input and a 12V trigger output connector. The Hegel P30 is available in both silver and black finish, so it can be matched with both the H30 and H20 power amplifiers.
Hegel Rost
The Hegel Rost can also mean “voice”, and the Rost is truly the “voice of Hegel”. With the patented SoundEngine amplifier technology, highly advanced preamplifier and delicately designed D/A-converter, the Rost sounds fluidly natural and dynamic. It preserves all the tiny details that create
the feeling of being there, and delivers deep, thundering bass when needed.
HUEI Phono Stage
Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to our amplifiers.
LINE MAGNETIC LM-150IA
LM-150IA- Integrated Amplifier – Push Pull KT120 – 2x100W
Overview:
One hundred watts per channel, Class AB Integrated Stereo Amplifier with KT150 output power tubes, 12AX7, 12AU7 and 6SN7 input tubes. 12AX7, 12AU7 and 6SN7 are for three stages of signal amplification while KT150 for the power amplification.
Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Shuguang 12AU7, Electro Harmonix 6SN7 and Tung-sol KT150. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-150IA as a power amplifier.
User bias control has been used for bias adjustment including 2 vu-meters.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Japanese ALPS volume potentiometer, American MIT and German Mcap coupling Capacitors etc Audio grade of components have been applied.
LINE MAGNETIC LM-201IA
LM-210IA – Integrated Amplifier – Single Ended 300B – 2x8W
The integrated amplifier LM-210IA is a Single Ended amplifier with 2x 300B tubes in Class A amplification and delivers 2x8W.
Output transformers are oversized. Listening, the magic of the 300B is total both in the richness of the timbres and the subtlety of the sound scene.
GLOBAL VIEW
Class A amplifier 2x8W RMS
Input stage: 2x 12AX7 Rectifier: 2x 5U4G Drivers: 2x 310A Power stage: 2x 300B
LINE MAGNETIC LM-211IA
LM-211IA- Integrated Amplifier – Push Pull EL34 – 2x32W
The Line Magnetic integrated amplifier LM-211IA is a push-pull amplifier with 4x EL34 tubes in Class AB amplification and delivers 2x15W in triode mode and 2x32W in ultra-linear mode. It has 4 balanced line inputs and 4/8Ω output groups.
The rear-illuminated front panel meter is used to adjust polarization of the tubes. The use of high-quality components (Realcap capacitors, ALPS potentiometer) wired in the air, for the most part, is the guarantee of exemplary reliability. Its transformers output are of EI type, specially designed for power supply. The LM-211IA delivers dynamic, rich and natural sound.
LINE MAGNETIC LM-212PA
LM-212PA -Mono Amplifier – Single Ended 212 – 1x32W
The LM-212PA is the «ultimate» monophonic amplifier from Line Magnetic, requiring more than two years of development. Its design is based on a Triode 212 mounted in Single Ended and «drived» by a 300B. In order to guarantee the durability of this exceptional tube, a sophisticated mechanical system protects it from shocks when not in use.
Finish: Silver
LINE MAGNETIC LM-216IA
LM-216IA – Integrated Amplifier – Push Pull KT88 – 2x38W
The Line Magnetic integrated amplifier LM-216IA is a push-pull amplifier with 4x KT88 tubes in Class AB amplification and delivers 2x22W in triode mode and 2x38W in ultra-linear mode. The LM-216iA delivers dynamic, rich, and natural sound.
GLOBAL VIEW
Class AB amplifier
2x22W RMS Triode mode
2x38W RMS Ultra-linear mode Input stage: 2x 12AX7 and 2x 12BH7 Power stage: 4x KT88
LINE MAGNETIC LM-34IA
LM-34IA- Integrated Amplifier – Push Pull AB EL34 – 2x40W
Forty watts per channel, Class AB Integrated Stereo Amplifier with EL34 output power tubes, 12AX7 and 12AU7 input tubes.
Standard with EL34 output tubes. Want to enjoy some other types of power tubes? That is why we have tube selector here. LM-34IA has tube selector switch and you can choose to replace the standard EL34 with KT range of power tubes include KT66, KT70, KT90, KT100 and 6550. Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-34IA as a power amplifier.
Specially designed EI transformers for power supply and two EI output transformers with wide bandwidth are applied. Handmade construction with the finest point-to-point wiring and special audiophiles components has carefully been selected by our designers.
User bias control has been used for bias adjustment and one meter has been added to the top plate to allow you to monitor bias with ease.
LINE MAGNETIC LM-503PA
LM-503PA – Mono Amplifier – Single Ended 845 – 1x24W (Price for a pair)
The LM-503PA monoblocs have been created from an original design of Western Electric. It uses a single ended 845 output stage with Full Music 300B drivers. Pre-amplifier stage uses a special Line Magnetic tube, the 310A.
The rectifier tube is a 5U3C and the power line is filtered by two special chokes. User bias controls for 300B and 845 are used for bias adjustment with a specific VU meter to allow you to monitor bias with ease.
LINE MAGNETIC LM-512CA
LM-512CA – Preamplifier – With 6KZ8, 6922 & RCA 22DE4
The LM-512CA received in March 2017 a Red Dot Award, a German award recognized as the Oscar of International Industrial Design.
The integrated preamplifier LM-512CA operates with 3 pairs of tubes. A large volume potentiometer sits in the centre of the front panel allowing independent adjustment of each of the two channels.
It has a balanced XLR, 3 RCA inputs and also RCA and XLR outputs.
The Balance phase selection allows choosing the selection between American phase and British phase input Mode.
The use of high-quality components (Multicap, BC Axial, Philips, Panasonic Relay) wired in the air, for the most part, is the guarantee of exemplary reliability.
Its transformers output are of EI type, specially designed for power supply.
Finish: Silver
LINE MAGNETIC LM-513PA
LM-513PA – Mono Amplifier – Push Pull 845 – 1x160W (Price for a pair)
The mono amplifier LM-513PA is a Push-Pull amplifier with 4x 845 tubes in pure Class A amplification and delivers 1x160W. The use of high-quality components (Multicap, Philips BC filter, Motorola) hand-made construction with the finest point-to-point wiring for the most part is the guarantee of exemplary reliability.
LINE MAGNETIC LM-805IA
LM-805IA – Integrated Amplifier – Single Ended 805 – 2x48W
The Line Magnetic 805iA uses single-ended triode 805 tubes and operate in pure Class A. It delivers 2x48W power. It has 3 unbalanced line inputs, 1 bypass input and 4, 8, 16Ω output groups. The rear-illuminated front panel meter is used to adjust the polarization of the tubes.
The use of high-quality components (Mundorf N-Cap capacitors, ALPS potentiometer) wired in the air for the most part is the guarantee of exemplary reliability. Its power and current capacity allows it to manage a very wide range of speakers. The use of the legendary triode 805 offers a listening to an unusual musicality.
LINE MAGNETIC LM-845 Premium
LM-845 Premium – Integrated Amplifier – Single Ended 845 – 2x30W
The LM-845 Premium is the result of many years of research on the 845 triodes Single Ended design. Thanks to its exceptional design and manufacturing quality, it is fast becoming the absolute reference in the high-end amplifiers world. With a power output of 2x30W, it can be used with most of the existing reference speakers.
The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is Outputs unit. In the amplifier unit the main amplifier and power supply parts are included while in the outputs unit output transformer and speaker outputs parts are included.
Amplifier unit and outputs unit are connected with two separate well-built connectors and cables for which you can put up and down or left and right.
All tube Integrated with 12AX7 input tubes, 310A signal amplification stage, 300B driver tubes and 845 output tubes. Well selected and matched tubes. Tubes we chose are Shuguang 12AX7, Line Magnetic 310A, Shuguang 300B and Shuguang 845.
Two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease.
Negative Feedback switch is on the front plate that you can choose between two levels of NFB to enjoy the different sound outputs.
In LM-845 Premium it includes eight transformers. Two pieces of power transformers, two output transformers, two coupling driver transformers, two chokes. In order to have a stable and better power supply, we have designed two pieces of specially designed Toroid power transformers in Balance. EI type of output transformers is installed in the outputs unit separately to lower interfere from the external radio frequency.
LINE MAGNETIC LM-845IA
LM-845IA – Integrated Amplifier – Single Ended 845 – 2x22W
The LM-845 is a quality upgrade of the old LM-518 amplifier. It delivers twenty-two watts per channel, Single Ended design, Pure Class A Integrated Stereo Amplifier with 845 output power tubes. The drivers are 6P3P tubes, the capacitors are Multicap, American MIT Coupling Capacitors, German MCAP Coupling Capacitors,
All tube Integrated with 12AX7 input tubes for voltage amplification, EL34 driver tubes, 5AR4 rectifier tubes and 845 output tubes. Driver tubes 6P3P can also be replaced by different kinds of driver tubes and you can select which tubes you prefer judging by different sounds. Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-845IA as a power amplifier.
User bias control has been used for bias adjustment and one meter has been added to the front plate to allow you to monitor bias with ease. External Hum Balance adjustment for sound adjustment.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
LINE MAGNETIC LM-88IA
LM-88IA – Integrated Amplifier – Push Pull KT88 – 2x42W
Forty-two watts per channel, Class AB Integrated Stereo Amplifier with KT88 output power tubes, 6CL8A and 12BH7 input tubes. Tubes we selected for the amplifier is Electro Harmonix 12BH7, Mullard 6CL8A and JJ Electronics KT88.
Well selected and matched tubes. No matter it is the Pre-stage or power stage of tubes we select and choose the best matching ones to use on the same unit of the amplifier to get the best sound quality out of it.
LM-88IA Amplifier can operate in two different ways Auto-biased or Fixed Bias. You can select the one you prefer. Power output for Auto-bias mode is 45 watts while for fixed bias it is 30 watts per channel. Once worked in Auto-bias mode it outputs a more warmth sound and go near to the way of Class A operation.
Different from other inputs Pre-In offers you a possibility to connect to some other Preamplifier so that you can the LM-88IA as a power amplifier.
Specially designed Toroid transformers made of Z11 Core for power supply and two Japanese Audio grade EI types of output transformers with wide bandwidth are applied. All transformers and chokes are encapsulated and installed separately on the amplifier to avoid and lower the disturbance between each other.
Audio Grade of components for LM-88IA: Japanese ALPS volume potentiometer, Multicap coupling Capacitors, American MIT Coupling Capacitors, German MCAP Coupling Capacitors, etc.
Finish: Black
LINE MAGNETIC LM-MINI84IA
LM-MINI84IA – Headphone Amplifier – Single Ended EL84 – 2x3W
Overview:
The LM-mini84IA is a real integrated amplifier using a single-ended output stage using EL84 tubes in class A mode. The output power of 2x3W perfectly matches with all audiophile headphones. This powerful capability allows the LM-mini84IA to drive qualitative hi-fi speakers. AA selector located on the front panel allows the user to choose between headphone or speaker output modes.
Highlights
– Compact
– Point-to-point wiring
Finish: Black
LINN Akurate DSM
Rediscover your music collection with Akurate DSM, a network music player and pre-amp that will reignite your passion for music.
LINN Klimax DSM
Klimax DSM integrates the outstanding streaming performance of Klimax DS with a digital and analogue pre-amp, ensuring you hear the best from any audio source connected.
LINN Uphorik Phono Stage
Uphorik features separate dedicated inputs and circuits for moving magnet (MM) and moving coil (MC) cartridges, and has a full range of adjustment that allows you to easily optimise its settings to any cartridge.
LUXMAN C-700u
Exquisite sound, flagship pedigree. A dream come true.
The C-700u control amplifier is our new middle of the range model that inherits some of our magnificent innovations, seen in our high end model, the C-900u, including our latest ODNF version 4.0 circuit, with significantly improved distortion characteristics and signal to noise performance and our new LECUA 1000, a computerized attenuator directly connected to the amplifier circuit, which enables smooth volume changes without any deterioration of sound quality. We are pursuing the concept of a simple and high quality control amplifier, exclusively designed for line level signals. What is more, this unit is also multifunctional, the loudness function interacting with the volume and tone controls, external pre-input connectivity and a fluorescent display with zoom and dimmer controls. Features like these make the C-700u suitable for the control center of your system, a new-generation of control amplifier, displaying performance consistent with high level functionality.
LUXMAN C-900u
Designed for supreme tonal quality
LUXMAN’s pursuit of the uppermost standards of tonal quality has lead to the creation of the C-900u. Four independent modules in the balanced amplification circuit enable the hot and cold components of the left and right audio signals to be handled independently to suppress unnecessary noise generation. Combining an evolved version 4.0 of our traditional ODNF circuit and a robust power supply has achieved high signal-to-noise performance and improved sound quality without distortion. LUXMAN’s original LECUA 1000, a stepped fixed resistance attenuator, is used for the volume adjustment system, a major feature of this new control amplifier. The 88 step range allows for more precise volume adjustment. This product is an appropriate centerpiece for any modern hifi system due to its elegant design, user friendly features, refined tone controls, premium tactile operation, and more.
LUXMAN L-505uXII
The attraction of the L-505uXII is its new level of refinement, approaching perfection as an authentically desirable product
The L-505uXII is the eagerly awaited Mark II version of the popular L-505uX that has been at the forefront of pre-amplifier design since it’s launch in 2011. Incorporating an abundance of proprietary technologies, such as Luxman’s Version 4.0 ODNF (Only Distortion Negative Feedback), as well as LECUA (Luxman Electronically Controlled Ultimate Attenuator), this product is a truly multifunctional integrated amplifier. As Luxman’s latest high-end model, the L-505uXII continues the evolution of the L-505 series, which has attracted many fans of audio quality and earned a great reputation. As an amplifier which exudes sophistication and authenticity beyond its class, the L-505uXII represents the latest in a long line of exemplary models.
LUXMAN L-507uXII
Incremental improvements accumulate to create a worthy successor that is built on heritage and introduces a new concept of value
The L-507uXII integrated amplifier earns its Mark II status by combining the knowledge and experience of developing refined pure Class A integrated amplifiers with state of the art technology. The L-507uXII features the New LECUA 1000 attenuator and a discretely configured buffer circuit as well as the Version 4.0 ODNF (Only Distortion Negative Feedback) original feedback circuit from LUXMAN to achieve spatial expression, overwhelming power and clarity that is comparable to a separate amplifier. Technology has progressed but the philosophy remains the same.The L-507uXII represents a quantum leap in integrated amplifier design and reflects the global perception of LUXMAN as the leader in brilliant audio expression and reproduction.
LUXMAN L-509X
The realisation of a desirable ideal the ultimate refinement of separates in a single unit.
The L-509X integrates the features of both a high quality separate amplifier and a high performance integrated amplifier into one product. The goal of creating an ideal integrated amplifier, initiated by LUXMAN with the launch of the L-509fSE in 2002, has now been advanced with the development of the L-509X. The L-509X integrated amplifier is equipped with many desirable features, such as the New LECUA1000 and a discretely configured buffer circuit in the output stage of the pre-amplifier circuit. LUXMAN’s ODNF (Only Distortion Negative Feedback) original amplifier feedback circuit and a power supply with independent left and right channel blocking capacitors are intrinsic to this design, as well as many components used only in high end models, ensuring high-quality audio reproduction. The design of the L-509X incorporates the cream of LUXMAN’s proprietary technologies, breaking new ground and creating the ultimate expression of “separates in a single unit”.
LUXMAN L-550AXII
A pure class A design transformed into a MKII model Capable of optimising sound density
Pursuing a sound that appeals to the senses whilst creating a deep musical impression is the ultimate role of the audio amplifier. With pure class A design, the L-550AXII integrated amplifier is a refined version of the L-550AX which was itself fully restyled in 2011. The MK II model boasts improved functionality with the latest technologies equivalent to the higher grade L-590AXII such as Version 4.0 of the original amplification feedback circuit ODNF, the new LECUA1000, computerized attenuator, and a buffer circuit with discrete configuration as standard. Such features result in a model with capability of expression above its class, offering a mellow and dense sound that only pure class A amplification can create. The L-550AXII is a mid-range integrated amplifier that increases its maturity in an attractive, functional design for music to be thoroughly enjoyed.
Luxman L-590 MKii
Bringing an evolved and expressive Class A sound to the peak of integrated amplifier
LUXMAN has been at the forefront of integrated amplifier design since releasing the first Japanease integrated amplifier, the SQ5A, in 1961.For over 50 years, LUXMAN has been confronting the challenges of balancing performance, function and design in an integrated amplifier body. These years of research and experience have resulted in the L-590AXII, the ultimate complete integrated amplifier design.With unprecedented spatial expression – and a sense of density particular to Class A design – outstanding realisation of tonal quality and penetrating audio ability have been achieved in this Class A integrated amplifier.The integrated L-590AXII introduces a combination of high grade technologies found in LUXMAN separate amplifiers, such as the original amplification feedback circuit ODNF4.0, LR independent block capacitors, discrete configured buffer circuits and the newly developed LECUA 1000.The L-590AXII is the peak of integrated amplifier design, amalgamating tried and tested know how and state of the art technology.The L-590AXII is the debut flagship model of integrated amplifier from LUXMAN to commemorate the 90th anniversary of this ground-breaking company.
LUXMAN LX-380
Capturing the era of the ‘38’ – the aspiration of a new vacuum tube amplifier
The LX-380 represents a new era in golden ‘38’ series vacuum tube integrated amplifiers from LUXMAN. Providing an exceptionally deep resonance of sound sources of various ages and genres, the LX-380 combines LECUA* – a computerized attenuator which carefully reproduces the dynamism of each performance – with a power amplifier circuit that expresses the rich musicality of the 6L6GC output tube. Housed in a wooden case that is reminiscent of the 28 series, the LX-380 appeals to a new generation with a winning combination of cutting edge technology and traditional know-how. *LECUA is an abbreviation of Luxman Electric Controlled Ultimate Attenuator.
LUXMAN M-700u
Longing dream comes true Flagship pedigree of exquisite sound
M-700u, a power amplifier, is a new middle range model that inherits our powerful drive circuit including the latest version, ODNF 4.0 circuit whose distortion characteristics and S/N performance have been significantly improved and with which the top-end model, M-900u, has been equipped and also including 4-parallel push-pull structure with 3-stage Darlington to pursue Luxman’s development philosophy for power amplifiers, “satisfying both high drivability and sound quality of high density”. The output from 120 W/8Ω to up to 840 W/1Ω instantaneously exploits the full potential of speaker characteristics under any load conditions. M-700u is a new-generation stereo power amplifier that combines richly expressive sound and high power without losing the music dynamism.
LUXMAN M-900u
To bring out the best sound expression
The stereo power amplification, M-900u, has been created to bring out the best sound expression from the speaker system. The rich gradation sound quality has been achieved from deep bass sound to clear high tone with sufficient drive force acquired by connecting the 4-parallel push-pull structural output units in parallel. Luxman’s original ODNF circuit that provides both a lively feeling and ultra-low distortion has been evolved to the latest version 4.0. The transparent large analog meter produces the enjoyment of listening to music with finesse, and the exterior design with blasted white finishing encloses high power gently. The BLT connection allows the user to use the unit as an ultra-high power monaural amplifier of 600W (8Ω).
* ODNF is an abbreviation for “Only Distortion Negative Feedback”.
McIntosh C1100
2-Channel Vacuum Tube Preamplifier
- Separate audio & control sections
- 12 analog inputs including Moving Coil & Moving Magnet phono
The C1100 preamplifier brings a new level of performance and luxury to McIntosh’s heralded preamplifier offerings – evidenced by its high level inputs having the lowest noise of any McIntosh preamplifier ever produced. It utilizes a two-chassis design where the control and power sections are completely separate from the audio section. Absolute isolation of a preamplifier”s two main functions – control and sound – is achieved by this unusual but effective design and will provide you with the purest sound reproduction possible for generations of listening enjoyment.
McIntosh C47
2-Channel Solid State Preamplifier
- Supports DSD64, DSD128 & DSD256 files
- 7 analog and 5 digital inputs
Enjoy your music the way you want with the versatile C47 Stereo Preamplifier. With a total of 12 inputs, you can connect most if not all of your music sources. It even plays many of the latest high resolution digital formats – including DSD files.
McIntosh C49
2-Channel Solid State Preamplifier
- 13 inputs (7 analog + 6 digital)
- Supports up to DSD256 files
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
Be prepared for future digital music technologies with the C49 Preamplifier. The C49 features our DA1 Digital Audio Module, which can be replaced by new modules as new digital audio technologies are developed. This will allow you to keep your C49 up to date with digital music formats and viable well into the future.
McIntosh C52
For connecting analog devices, it includes 3 balanced and 4 unbalanced fully assignable inputs plus 1 each of Moving Coil and Moving
McIntosh D1100
2-Channel Digital Preamplifier
- Reference level digital preamp and DAC
- Use as a standalone unit or with C1100
The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC). Its 8-channel, 32-bit DAC is used in Quad Balanced mode with half of it dedicated to the left audio channel and the other half to the right channel. It’s the most advanced DAC we’ve ever used and delivers an unprecedented level of performance so that all your digital music is reproduced with exceptional accuracy and authenticity.
McIntosh D150
2-Channel Digital Preamplifier
- Supports DSD and DXD
- 2 Coax, 2 Optical, 1 USB Input
The D150 Digital Preamplifier expands McIntosh’s digital music capabilities by supporting many of the newest digital audio formats such as DSD and DXD. A USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DXD 352.8kHz and DXD 384kHz. Two coaxial and two optical inputs accept up to 24-bit/192kHz signals. It is a simple solution to add the latest digital music formats to your existing system.
McIntosh MA252
2-Channel Integrated Amplifier
- Hybrid design: vacuum tube preamp and solid state power amp
- 100 Watts into 8 Ohms
- 160 Watts into 4 Ohms
The MA252 Integrated Amplifier is the first hybrid integrated amplifier from McIntosh. Taking retro design cues from the legendary McIntosh MC275 Vacuum Tube Amplifier, the MA252 combines the best of vacuum tube and solid state circuit design to create an amplifier that’s both visually and sonically stunning.
McIntosh MA5300
2-Channel Integrated Amplifier
- 100 Watts into 8 Ohms
- 160 Watts into 4 Ohms
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
The MA5300 Integrated Amplifier is proof that big sound can come in small packages. It is our smallest solid state integrated amplifier in terms of both power output and physical size, making it an ideal choice for smaller spaces or for someone just beginning to assemble a home audio system. It’s a direct coupled amplifier that delivers 100 Watts per channel into 8 Ohm speakers or 160 Watts per channel into 4 Ohm speakers. New dual scale blue Watt meters give an accurate readout of power output for both 4 and 8 Ohm impedances.
McIntosh MA7200
2-Channel Integrated Amplifier
- 200 Watts x 2 channel
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
Offering 200 Watts per channel and 14 total inputs, the space-saving MA7200 Integrated Amplifier can easily become the core of your 2-channel home audio system.
Making up its 14 inputs are 8 analog connections (5 unbalanced, 1 balanced and 1 each of Moving Coil and Moving Magnet inputs for turntables) along with 6 digital (2 each of coaxial and optical plus 1 USB and 1 proprietary MCT for use with our MCT500 SACD/CD Transport). The digital inputs are housed in our DA1 Digital Audio Module, which can easily be replaced by future modules to keep your MA7200 current with the latest digital audio technologies. (NOW AVAILABLE: Optional dealer installed upgrade to the DA2 Digital Audio Module.) The DA1 comes with an 8-channel, 32-bit Digital-to-Analog Converter (DAC) used in Quad Balanced mode. The USB input accepts PCM signals up to 32-bit/384kHz and supports up to DSD256 and DXD 384kHz for high resolution audio playback, while the coax and optical inputs will decode music up to 24-bit/192kHz. All inputs can be given custom names for user-friendly system control and configuration.
McIntosh MA8900
2-Channel Integrated Amplifier
- 200 Watts x 2 channel
- 5-band tone control
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
Bring all your music to life with the MA8900 Integrated Amplifier. It offers 200 Watts per channel and combines many new features with our legendary amplification prowess and preamplifier capabilities into one all-encompassing unit.
McIntosh MA9000
2-Channel Integrated Amplifier
- 300 Watts x 2 channel
- 8-band tone control
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
The MA9000 Integrated Amplifier can help you achieve audio perfection. Our largest integrated in both size and power, it offers 300 Watts per channel and combines our amplifier and preamplifier expertise into one comprehensive unit.
McIntosh MC1.25KW Price Per Pair
1-Channel Solid State Amplifier
- 1,200 Watt Quad Balanced Monoblock
- Redesigned from top to bottom
The MC1.25KW Quad Balanced Power Amplifier is one of our most advanced amplifiers. Redesigned from top to bottom, it replaces the venerable MC1.2KW as our most powerful single chassis monoblock amplifier. A simple glance at this 158 pound (71.7 kg) amp is enough to convey its power and performance capabilities, but when you hear it – then you’ll truly understand what it can do.
The MC1.25KW outputs 1,200 Watts of pure power into a single channel with a nearly imperceptible total harmonic distortion of 0.005%. This astonishing amount of power is fully available to 2, 4 or 8 Ohm speakers via our Autoformer™ technology. A pair of these amps can anchor a home audio system that can rival nearly any stereo system in the world.
McIntosh MC205
5-Channel Solid State Amplifier
- 200 Watts x 5 Channels
- Designed for home theaters
- Balanced and unbalanced inputs
The MC205 delivers all the explosive dynamics that high-performance home theater systems require by delivering 200 Watts of power to each of the 5 individual channels commonly used in many home theaters. Our exclusive Dynamic Power Manager® (DPM) technology enables it to deliver full power into 4 and 8 Ohm speakers – making the MC205 a perfect choice for a wide variety of home theater speakers. It can also be used as a two zone amplifier with three channels operating one zone and the remaining two channels assigned to a second zone.
McIntosh MC207
7-Channel Solid State Amplifier
- 200 Watts x 7 Channels
- Designed for home theaters
- Balanced and unbalanced inputs
Similar to the MC205, the MC207 7-channel home theater amplifier produces an amazing movie experience in your home by delivering 200 Watts of power to each speaker channel found in 7.1 home theater systems. It can also be used in 5.1 home theaters with the remaining 2 channels used to power a second zone in stereo. Our exclusive Dynamic Power Manager® (DPM) technology enables the MC207 to deliver its full power into both 4 and 8 Ohm speakers – making it compatible with a wide variety of home theater speakers.
McIntosh MC2301 Price per Piece
1-Channel Vacuum Tube Amplifier
- 300 Watt Quad Balanced Monoblock
- Vacuum tube powered
From the demands of massed chorale to full-on rock and roll, the MC2301 delivers the most extraordinarily lifelike and dynamic performance ever heard from a McIntosh tube amplifier. With an output of 300 Watts, it provides enough high power to drive even the most demanding loudspeaker. And thanks to our patented Unity Coupled Circuit output transformer, this full 300 Watts is available to 2, 4 or 8 Ohm speakers.
McIntosh MC275
2-Channel Vacuum Tube Amplifier
- 75 Watts x 2 channel
- Vacuum Tube Design
This tube power amplifier has all the features to meet the needs of today’s music enthusiast, while preserving the qualities that have made the MC275 the most revered McIntosh tube amplifier.
This sixth generation MC275 has many subtle enhancements from the previous release that greatly improve performance. Combined with the widest bandwidth McIntosh output transformer design, the MC275 features tauter bass control and thermally quiet circuit design. The result is pure music.
McIntosh MC2KW Price per Pair
1-Channel Solid State Amplifier
- 2,000 Watt Quad Balanced Monoblock
- 3 speaker terminals for tri-wiring
- 2 Power Modules, 1 Output Module
The MC2KW monoblock amplifier is designed to exceed the demands of true lifelike playback levels, capable of delivering 2,000 watts of continuous power and 8,000 watts of peak power into 2, 4 or 8 ohm speakers. But sheer power output is just the beginning of the story.
McIntosh MC303
3-Channel Solid State Amplifier
- 300 Watts x 3 Channels
- Designed for home theaters
- Tri-Amp capability
The McIntosh MC303 is our most powerful multi-channel amplifier to date, providing 300 Watts into each of 3 channels. It features our renowned Autoformer™, which allows its full 300 Watts of power to be delivered into 2, 4 or 8 Ohm speakers with the lowest noise and distortion performance possible.
McIntosh MC303
3-Channel Solid State Amplifier
- 300 Watts x 3 Channels
- Designed for home theaters
- Tri-Amp capability
The McIntosh MC303 is our most powerful multi-channel amplifier to date, providing 300 Watts into each of 3 channels. It features our renowned Autoformer™, which allows its full 300 Watts of power to be delivered into 2, 4 or 8 Ohm speakers with the lowest noise and distortion performance possible.
McIntosh MC312
2-Channel Solid State Amplifier
- 300 Watts x 2 Channels
- 27% increase in Dynamic Headroom compared to previous model
- McIntosh Autoformers™
Prepare yourself for years and years of musical enjoyment with the MC312 Power Amplifier. A 300 Watt per channel stereo amplifier, the MC312 is a great choice to power virtually any home audio system. The full 300 Watts can be delivered to almost any speakers regardless if they have 2, 4 or 8 Ohm impedance thanks to our unique Autoformer™ technology.